Audio Technica - AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)
Audio Technica - AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)
Format: Turntable Equipment
UPC: 4961310158491
Release Date:
Condition: N
Low stock: 2 left
Couldn't load pickup availability
Share
Audio Technica AT-LPW30BKR Fully Manual Belt-Drive Turntable 33/45 (Mahogany)
The AT-LPW30 is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW30 is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Product Features
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber matAT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Wow and Flutter < 0.15% WRMS (33RPM) at 3kHz
Signal-to-Noise Ratio > 60dB
Output Level Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec - Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100 to 240V, 50/60HzDimensions 116.9 x 420.0 x 340.0 (H x W x Dmm)
Weight 5 kg
Tonearm Type Static balanced straight aluminum pipe tonearm
Effective Arm Length 223.6 mm
Overhang 18.6 mm
Tracking Error Angle <2 degrees
Applicable Cartridge Weight 12-17 g
Replacement Stylus AT-VMN95C
Notes Stylus pressure adjustment range: 0-3 g
SHIPPING & RETURNS
SHIPPING & RETURNS
FREE SHIPPING on purchases over $50
LOCAL PICKUP available at checkout
$5 MEDIA MAIL shipping in the USA
RETURNS
Items may be returned within 60 days of the delivery date.
If not defective, any product returned must be in the same condition in which customer received it and in the original retail packaging.
Yellow Racket will be responsible for cost of return on all damaged or defective items. Customer is responsible for cost of return if item is not damaged or defective. Photo/video evidence of damages/defects must be provided by customer within 14 days of the delivery date.
Customer assumes all responsibility for duties and taxes associated with international shipments.
GRADING
GRADING
Yellow Racket assigns condition based on the Goldmine Standard for grading records.
New (N) (Not typically included in the Goldmine Standard)
New records are purchased directly from the label, distributor, or registered wholesaler. Records are still sealed. Jackets may have slight shelf wear, but media has never been played.
Mint (M)
Still sealed. Never played. No observable flaws. Items have been purchased secondhand.
Near Mint (NM)
A Near Mint (NM) record will play perfectly, with no imperfections during playback. The record should show no obvious signs of wear.
The cover (and any additional packaging) has no creases, folds, seam splits, cut-out holes, or other noticeable defects.
Very Good Plus (VG+)
A Very Good Plus (VG+) record will show some signs that it was played and otherwise handled by a previous owner who took good care of it.
Defects should be more of a cosmetic nature, not affecting the actual playback as a whole. Record surfaces may show some signs of wear and may have slight scuffs or very light scratches.
The disc and LP cover may have slight signs of wear, and may be gently marred by spindle marks, paper scuffs, wrinkled corners, etc.
Very Good (VG)
Many of the defects found in a VG+ record will be more pronounced in a VG disc. Surface noise will be evident, but will not overpower the music. Disc may have light scratches (deep enough to feel with a fingernail) that will affect the sound.
Labels, jackets, and inserts will have visible cosmetic flaws such as wrinkles, cut-outs, slight splitting, etc. However, it will usually have less than a dozen minor flaws.
Good (G)
A record in Good condition can be played through without skipping. But it will have significant surface noise, scratches, and visible groove wear. A cover or sleeve will have seam splits, especially at the bottom or on the spine. Tape, writing, ring wear, or other defects will be present.
While the record will be playable without skipping, noticeable surface noise and "ticks" will almost certainly accompany the playback.
Poor (P), Fair (F)
The record may be cracked, badly warped, or won't play through without skipping or repeating. The picture sleeve may be water damaged, split, or heavily marred by wear and writing.
